FLOW TRANSMITTER WITH FLOW ELEMENT AND DIGITAL INDICATOR
The Flow Transmitter shall be preferably electromagnetic type and shall be supplied with Flow element and facility for fitment of Flow Indicator at local and remote location. These Flow Transmitters shall meet the following requirements in general:
Temperature range : 0-70°C
Type of sensing element : Electromagnetic flow sensor with microprocessor based signal converter
Type : Insertion with solid state transmitter
Enclosure type : Nema 4X
Protection : IP67
Input : 24VDC/220VAC 50 Hz
Output : 4-20 mA, 2 wire, HART
Flow rate of Water : 0-500 m3/hr
Pressure of water : 0-16 bar(working)–Max press 25 bar
Casing material : Stainless Steel
Accuracy : ± 0.5% of full scale
Material of Seals : Teflon
Other internal Parts : SS 304 / 316
Electrodes : SS 316
Socket connection size : ½” NTP with half coupling to connection
Connection Size/Type : 200 NB, Flanged as per ASA / ANSI
Connecting details of Flow Element with water pipes are to be provided. All the piping, flanges, unions, half couplings, valves and electrical components etc. required for installation of Flow Element and Transmitter shall be there.
Details of Electromagnetic Flow Sensor:
Flow Tube : SS304
Coil Housing : Fully welded, SS316 for meter
Electrodes : SS316 / SS316L & self cleaning type
Process connection : Flanged to ANSI 300#
Flanges : CS
Details of Electromagnetic Signal Converter:
Type : Microprocessor based
Bright graphic display : Large backlight with 2 line graphic
LC display parameters : Actual flow rate and totalizer
Housing
Temperature range : 0-70°C
Type of sensing element : Electromagnetic flow sensor with microprocessor based signal converter
Type : Insertion with solid state transmitter
Enclosure type : Nema 4X
Protection : IP67
Input : 24VDC/220VAC 50 Hz
Output : 4-20 mA, 2 wire, HART
Flow rate of Water : 0-500 m3/hr
Pressure of water : 0-16 bar(working)–Max press 25 bar
Casing material : Stainless Steel
Accuracy : ± 0.5% of full scale
Material of Seals : Teflon
Other internal Parts : SS 304 / 316
Electrodes : SS 316
Socket connection size : ½” NTP with half coupling to connection
Connection Size/Type : 200 NB, Flanged as per ASA / ANSI
Connecting details of Flow Element with water pipes are to be provided. All the piping, flanges, unions, half couplings, valves and electrical components etc. required for installation of Flow Element and Transmitter shall be there.
Details of Electromagnetic Flow Sensor:
Flow Tube : SS304
Coil Housing : Fully welded, SS316 for meter
Electrodes : SS316 / SS316L & self cleaning type
Process connection : Flanged to ANSI 300#
Flanges : CS
Details of Electromagnetic Signal Converter:
Type : Microprocessor based
Bright graphic display : Large backlight with 2 line graphic
LC display parameters : Actual flow rate and totalizer
Housing
We also have an inquiry for thermal mass flowmeter with specification as follows:
回复删除Fluid : Air
Maximum Flow : 400 Nm3/hr
Minimum Flow : 0 Nm3/hr
operating flow : 40 Nm3/hr
Pressure Range : 5 – 6 kg/cm2
TEMP : AMBIENT
Line Size : DN 40, DN 50, DN 65, DN 80, DN 150
Flange Rating : ANSI B16.5 RF CLASS 150
End Connection : Flanged
Wetted material - 316 SS
Transmitter Mounting : Totalizer + Sensor Integral
Type: 2-Wire
OUTPUT-4-20 ma
Power Supply: 24 VDC
Kindly indicate us your best price for respective product. Wait for your quote soon.
Does Hastelloy-C could resist the corrosion from HF & HNO3?
回复删除If battery powered does not have any output, then how could we read the measurement from the flow meter?
How long is the life span of the battery?
What is the battery type and if it have already lost power, can we replace it with a local battery?
For the request:
Please change the pressure rating into ANSI 150 (1A).
If iHastelloy-C could resist HF & HNO3, kindly quote us battery powered magnetic flowmeter with Hastelloy-C electrode as a comparison for our customer.