SHDP/GP Differential Pressure/Pressure Transmitter with Remote Diaphragm seals

作者： -
SHDP/GP Differential Pressure/Pressure Transmitter with Remote Diaphragm seals provides a kind of reliable measuring way to avoid the measured medium from directly contacting with seal diaphragm of the transmitter.
diaphragm seal level transmitter is suitable for the following operation conditions:
  • Mediums with high temperature should be isolated with transmitter.
  • Measured mediums have corrosion to transmitters.
  • Suspending liquid or mediums with high viscosity
  • Measured mediums solidize or crystalize due to change of environment or technological process temperature.
  • Strict purification of measuring head is needed for replacing measured mediums
  • Measuring head must be kept clean and sanitary.
  • Pressure measurement of sealed container

Model Selection from SILVER AUTOMATION INSTRUMENTS

评论

发表评论

此博客中的热门博文

Coriolis Flowmeter and Thermal Mass Flow Meter in Nitrogen and Helium

作者： -
图片
Recently, we receive an application from our customer, they need to measure Nitrogen and helium gas flow, but he is not sure which is better or suitable for his application, thermal mass flow meter or Coriolis flowmeter? Let’s see the case and let Silver Automation Instruments to Analysis and choose proper gas flow meters for them. Question: I have an application for mass flow measurement of gas, and it would be preferred to use the new style Coriolis mass flowmeter if possible. We would also like to use the same flowmeter for both helium and Nitrogen if possible, hence wish Silver Automation Instruments can calculate the flow range to us and tell us which size may suit both. Flowing velocity will be similar for both applications, however as you can see, helium flowing density is much less so if we need two meters to measure these flows. Flow conditions as follows: 1/ N2 (Nitrogen) flow , 20 sl/sec to 150 sl/sec @ 130psig, 15 degC = 72 to 540 NM3/hr (7.71 to 57.9 AM3/hr), 90 to 675 k...
阅读全文

Coriolis mass flow meters for batch sucrose solution Applications

作者： -
  Questions Hello I have firstly an application to measure and batch sucrose solution. Pipe is ¾”, flow rate would be approximately 30-50 l/min maximum Sucrose is at 67 Brix, hence is concentrated. Temperature is ambient. Viscosity is to be confirmed but appears not very viscous, estimated to be around 50 cP. Density is around 1.32 kg/l 1/ Can we measure this with a Mag flow meter, I am unsure whether sucrose solution is conductive? If not conductive, I expect we will need to use Coriolis meter or oval gear meter? 2/ Please quote for 20mm small mass flow meter, 24Vdc powered, pulse and analogue output Triclover process connections, 20mm size (customer will reduce flow to suit the meter) Pressure is low, < 1barg Secondly, For another application I have quoted small mag flow meter for batching Fruit pulp at 85 degC. Product is very conductive, and has a consistency like tomato sauce (or ketchup) Viscosity is likely to...
阅读全文

The Model Selection of Mag Meter& Mag Flow Meter Price

作者： -
图片
1.The points of installation (1) The mount point should choose the lowest place in the pipe after ensuring the flow direction of the measured material. The mount point should be selected at any time when the pile is full of fluid in case of the error caused by the indicator which is not in the zero position due to the vacancy of fluid in the pipe. (2) The straight length should be kept in the front of 5D and in the rear of 3D In order to acquire the measuring accuracy of the instrument, the flow development length of the upstream side in the sensor is not less than 5D, and the downstream side is not less than 3D ( D is the nominal diameter of the sensor). If there are two or more angel heads or other baffles in the upstream side, the front straight length should be larger than 10D. (3) The signal electrode is in the horizontal direction To make the electrode axis parallels the horizon when installing horizontally for the electrode at the bottom will be covered by pre...
阅读全文