FLOW TRANSMITTER WITH FLOW ELEMENT AND DIGITAL INDICATOR

作者： -
The Flow Transmitter shall be preferably electromagnetic type and shall be supplied with Flow element and facility for fitment of Flow Indicator at local and remote location. These Flow Transmitters shall meet the following requirements in general:



Temperature range : 0-70°C

Type of sensing element : Electromagnetic flow sensor with microprocessor based signal converter

Type : Insertion with solid state transmitter

Enclosure type : Nema 4X

Protection : IP67

Input : 24VDC/220VAC 50 Hz

Output : 4-20 mA, 2 wire, HART

Flow rate of Water : 0-500 m3/hr

Pressure of water : 0-16 bar(working)–Max press 25 bar

Casing material : Stainless Steel

Accuracy : ± 0.5% of full scale

Material of Seals : Teflon

Other internal Parts : SS 304 / 316

Electrodes : SS 316

Socket connection size : ½” NTP with half coupling to connection

Connection Size/Type : 200 NB, Flanged as per ASA / ANSI



Connecting details of Flow Element with water pipes are to be provided. All the piping, flanges, unions, half couplings, valves and electrical components etc. required for installation of Flow Element and Transmitter shall be there.



Details of Electromagnetic Flow Sensor:


Flow Tube : SS304

Coil Housing : Fully welded, SS316 for meter

Electrodes : SS316 / SS316L & self cleaning type

Process connection : Flanged to ANSI 300#

Flanges : CS




Details of Electromagnetic Signal Converter:


Type : Microprocessor based

Bright graphic display : Large backlight with 2 line graphic

LC display parameters : Actual flow rate and totalizer

Housing : Die

评论

发表评论

此博客中的热门博文

The Model Selection of Mag Meter& Mag Flow Meter Price

作者： -
图片
1.The points of installation (1) The mount point should choose the lowest place in the pipe after ensuring the flow direction of the measured material. The mount point should be selected at any time when the pile is full of fluid in case of the error caused by the indicator which is not in the zero position due to the vacancy of fluid in the pipe. (2) The straight length should be kept in the front of 5D and in the rear of 3D In order to acquire the measuring accuracy of the instrument, the flow development length of the upstream side in the sensor is not less than 5D, and the downstream side is not less than 3D ( D is the nominal diameter of the sensor). If there are two or more angel heads or other baffles in the upstream side, the front straight length should be larger than 10D. (3) The signal electrode is in the horizontal direction To make the electrode axis parallels the horizon when installing horizontally for the electrode at the bottom will be covered by pre...
阅读全文

What applications do flow meters usually used?

作者： -
图片
1. Energy metering Energy is divided into primary energy (coal, crude oil, coalbed methane, LPG and natural gas), secondary energy (electric power, coke, artificial gas, refined oil, liquefied petroleum gas, steam) and carrying energy (compressed air, oxygen, nitrogen, hydrogen, water). Energy metering is an important means to manage energy scientifically, achieve energy saving and improve economic efficiency. The flow meter is an important part of energy metering instruments. Very large quantities of flow meters are used in common energy such as water, artificial gas, natural gas, steam, and oil. They are an indispensable tool for energy management and economic accounting. 2. The process of industrial production Flow Meter is one of the large-class instruments in the process automation instrument and device, which is widely used in various areas of the national economy like metallurgy, electric power, coal, chemical industry, petroleum, transportation, construction, textile, food...
阅读全文

Coriolis mass flow meters for batch sucrose solution Applications

作者： -
  Questions Hello I have firstly an application to measure and batch sucrose solution. Pipe is ¾”, flow rate would be approximately 30-50 l/min maximum Sucrose is at 67 Brix, hence is concentrated. Temperature is ambient. Viscosity is to be confirmed but appears not very viscous, estimated to be around 50 cP. Density is around 1.32 kg/l 1/ Can we measure this with a Mag flow meter, I am unsure whether sucrose solution is conductive? If not conductive, I expect we will need to use Coriolis meter or oval gear meter? 2/ Please quote for 20mm small mass flow meter, 24Vdc powered, pulse and analogue output Triclover process connections, 20mm size (customer will reduce flow to suit the meter) Pressure is low, < 1barg Secondly, For another application I have quoted small mag flow meter for batching Fruit pulp at 85 degC. Product is very conductive, and has a consistency like tomato sauce (or ketchup) Viscosity is likely to...
阅读全文