Electromagnetic Flow meters from China Manufacture

作者： -
Electromagnetic flow meters which is manufactured in China is a kind of flow meters which to measure conductive medium, such as water ,waste water, milk , acid and so on. below is the magnetic flow meters which is request from our customers.



NEB Water Injection Pumps Discharge Electro Magnetic Flow Meter Details (Mandatory Item)
　 　 Specifications
(Requested)		 Offered Meter Specifications
(To Be Filled By Supplier / Manufacturer)
　 Description Meter Specifications Remarks Meter Specifications Remarks
MODEL 　 Any Model Meets The Below Specs. 　 　 　
Manufacturer 　 Any 　 　 　
General Data Line size  6 in 　 　 　
Pipe schedule  XXS 　 　 　
Piping class 151440X 　 　 　
Pipe material Plain Carbon Steel (ANSI B3) 　 　 　
Fluid Corrosive Water 　 　 　
Service Sour Service 　 　 　
Meter Details Type Electromagnetic Flow meter China 　 　 　
Size 6 in 　 　 　
Rating 1500 Ib ANSI 　 　 　
Facing HUB end connections  　 　 　
Flange Connection  (DN6" Grayloc WN-HUB Dn 6GR52)
Supplier must supply the Grayloc clamps; bolts, seal rings and any other accessories required for installation		 　 　 　
Mounting Length 450 mm 　 　 　
Range 0 To 120 Am³/h Re-rangeable up to 200Am³/h 　 　
Accuracy ±1% of reading 　 　 　
maximum pressure 236 barg 　 　 　
maximum temperature 85° C 　 　 　
Electrode Type / Material Fixed / Hastelloy C 　 　 　
Housing Protection STD + IP67 Body & Internal Material must Conform to
NACE-MR-01-075 (2003)		 　 　
Housing Material Aluminium with Offshore painting 　 　
Meter Hubs Material ASTM A105N 　 　
Meter Tube Material 316L Stainless Steel 　 　
Meter Liner Material Irathane 　 　
Transmitter Details Location Field 　 　 　
Display With Local Display 　 　 　
Mounting Meter Head 　 　 　
Electrical Connections 2 connections  M20x1.5 　 　 　
Output signals Two output signals:
(1) 4-20 mA 24 Vdc /HART (Analogic)
(2) Frequency Output		 　 　 　
Communication HART 　 　 　
Power supply 240 Vac, 50Hz 　 　 　
Area classification Non-Hazardous 　 　 　
Electrical Protection Class STD + IP67 　 　 　

评论

发表评论

此博客中的热门博文

The Model Selection of Mag Meter& Mag Flow Meter Price

作者： -
图片
1.The points of installation (1) The mount point should choose the lowest place in the pipe after ensuring the flow direction of the measured material. The mount point should be selected at any time when the pile is full of fluid in case of the error caused by the indicator which is not in the zero position due to the vacancy of fluid in the pipe. (2) The straight length should be kept in the front of 5D and in the rear of 3D In order to acquire the measuring accuracy of the instrument, the flow development length of the upstream side in the sensor is not less than 5D, and the downstream side is not less than 3D ( D is the nominal diameter of the sensor). If there are two or more angel heads or other baffles in the upstream side, the front straight length should be larger than 10D. (3) The signal electrode is in the horizontal direction To make the electrode axis parallels the horizon when installing horizontally for the electrode at the bottom will be covered by pre...
阅读全文

What applications do flow meters usually used?

作者： -
图片
1. Energy metering Energy is divided into primary energy (coal, crude oil, coalbed methane, LPG and natural gas), secondary energy (electric power, coke, artificial gas, refined oil, liquefied petroleum gas, steam) and carrying energy (compressed air, oxygen, nitrogen, hydrogen, water). Energy metering is an important means to manage energy scientifically, achieve energy saving and improve economic efficiency. The flow meter is an important part of energy metering instruments. Very large quantities of flow meters are used in common energy such as water, artificial gas, natural gas, steam, and oil. They are an indispensable tool for energy management and economic accounting. 2. The process of industrial production Flow Meter is one of the large-class instruments in the process automation instrument and device, which is widely used in various areas of the national economy like metallurgy, electric power, coal, chemical industry, petroleum, transportation, construction, textile, food...
阅读全文

Coriolis mass flow meters for batch sucrose solution Applications

作者： -
  Questions Hello I have firstly an application to measure and batch sucrose solution. Pipe is ¾”, flow rate would be approximately 30-50 l/min maximum Sucrose is at 67 Brix, hence is concentrated. Temperature is ambient. Viscosity is to be confirmed but appears not very viscous, estimated to be around 50 cP. Density is around 1.32 kg/l 1/ Can we measure this with a Mag flow meter, I am unsure whether sucrose solution is conductive? If not conductive, I expect we will need to use Coriolis meter or oval gear meter? 2/ Please quote for 20mm small mass flow meter, 24Vdc powered, pulse and analogue output Triclover process connections, 20mm size (customer will reduce flow to suit the meter) Pressure is low, < 1barg Secondly, For another application I have quoted small mag flow meter for batching Fruit pulp at 85 degC. Product is very conductive, and has a consistency like tomato sauce (or ketchup) Viscosity is likely to...
阅读全文